GE GBF 412 Series Owner's Manual page 14

Loading
Loading the Silverware Basket
The silverware basket can be divided into three
separate modules that can be used in both upper
and lower racks.
1 1 1
6 2 2
5 3 3 3 3
4 4 4 4
5 2 2
1 1 1
In
Modules for 10 place setting models
WARNING
1. Do not let items extend though bottom.
2. Be sure nothing protrudes though bottom of the basket or rack to block the lower spray arm.
Adding a Dish
To add or remove items after a washing cycle starts:
1. Open door slightly and wait a few seconds until
wash action stops before completely opening.
2. Add the item.
3. Close the door firmly to latch within 4 secs, then
the cycle will resume automatically.
Filling the Rinse Aid dispenser
Rinse aid greatly improves drying and reduces water
spots and filming.
Without rinse aid your dishes and dishwasher interior will
have excessive moisture.
The Heated Dry option will not perform as well without
rinse aid. The rinse aid dispenser, located next to the
Detergent cup, automatically releases a measured
amount of rinse aid during the last rinse.
Your dishwasher is designed to use a liquid rinse aid.
The use of rinse greatly improves drying performance after the final rinse.
Do not use a solid or bar-type rinse aid. Under normal conditions, the rinse aid will last approximately
one month. It is best to keep it full, but do not over fill.
14
1 1 1 1 1
2 2 2 1
3 3 3 3 3 3 1
4 4 4 4 4 4 1
2 2 2 1
1 1 1 1 1
1 2 3 4 5 6
4
4 6
2 2
4
1 1 1
4 5
5 4
1 1 1
4
2 2
4
4
In
Modules for 8 place setting models
CAUTION
TO AVOID BURN INJURY:
Slightly open door and wait until spray arms and wash
action stop.
Hot water may splash out of dishwasher.
Failure to do so may result in injury.
If the rinse aid is low, the Rinse Aid light is illuminated
at the beginning and end of the cycle indicating that it is
time to refill.
1. Spoons
2. Knives
3. Salad forks
4. Forks
5. Large spoons
6. Large forks
1
3
2 2
1
1 1 1
3
3
1 1 1
1
2 2
3
1
3
3
3
3
29-6273