Target Conductivity - White's TDI Pro Owner's Manual

14 TDI Pro Owner's Gui de

TARGET CONDUCTIVITY-

What i t does
This control allows the user to select whether to hear only low- conductive
targets, only high-conductive targets, or both types of targets. Low-con-
ductive targets, like small-to-medium sized gold nuggets will make a high-
tone sound. High-conductive targets like coins, except nickels, will make
a low-tone sound. This feature only works if the FINE Ground Balance
control is clockwise from the OFF position. When FINE ground balance
control is OFF, the Target Conductivity switch must be set to ALL or LOW
and all signals will sound the same.
How to use i t
Set FINE GEB clockwise from OFF, Set TARGET CONDUCTIVITY to
low for low-conductive metals only, including small to medium-sized
gold nuggets, most small to large specimen gold in quartz, small gold
rings, very small silver rings and small gold coins, nickels, small thin ham-
mered silver coins, small bronze Roman coins, small boot tacks, lead bird
shot, tiny broken bits of iron, small to medium aluminum & pull-tabs, foil
and bits and tips of small nails, etc.
Set FINE GEB clockwise from OFF, Set TARGET CONDUCTIVITY to high
for high-conductive metals only, including all USA coins (except nickels),
most silver rings, silver U.S. coins, very large gold rings, large gold nug-