Banner PLI-A10 Specifications

2x 1.25 mm (0.049")
(Polyethylene)
ø3.0 mm (0.12")
Smooth Ferrule
(Stainless)
Anodized Aluminum Knurled
Locking Ferrule
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty
period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any
other warranty either expressed or implied.
Printed in USA
PLI-A10 Adjustable Beam Spot Plastic Fiber Optic Assembly
Integrated convergent lens, M6 threaded housing, unterminated
• Bifurcated coaxial ø0.5 mm/9x 0.25 mm fibers
• Integrated lens converges emitted light at a variable distance from the compact
fiber head
• Beam spot diameter varies according to fiber ferrule insertion depth
• Spot diameter is adjustable from ø0.5 mm (0.04") to ø3.2 mm (0.14")
• Metal hex nuts (M6 x 0.75) and lock washer included
• Cut-to-length fiber optic cable
• A normal plastic fiber optic has a "beam diffusion" angle of about 60°, making it
difficult (if not impossible) to sense very small targets. A convergent lens allows
focusing of the beam to a small spot, enabling detection of minute targets at
relatively long distances.
PLI-A10 Fiber Specifications
Construction
Focal Distance
Beam Spot Diameter
Operating Temperature
Cable Length
Excess Gain
Dimensions
32.2 mm
(1.27")
2x M6 x 0.75
Jam Nuts (Stainless)
M6 Washer (Stainless)
M6 x 0.75 Thread
(Anodized Aluminum)
03/02
Features
Anodized aluminum housing
Glass lens
PMMA (acrylic) fiber core
Fluoropolymer fiber cladding
Polyethylene jacket
Stainless steel hardware
8 mm (0.31") to 32 mm (1.26")
ø0.5 mm (0.04") to ø3.2 mm (0.14")
° ° °
-40 to +70 C (-40 to +158
Standard length 2 m (79")
Custom lengths available on request
Dependent on amplifier used
9x ø0.25 mm (0.010")
ø0.50 mm (0.20")
Detail View
°
F)
P/N 109026