Subscribe to Our Youtube Channel
Related Manuals for Teac LE43A718UHD
Summary of Contents for Teac LE43A718UHD
-
Page 1: User Manual
LE43A718UHD A7 Series LE49A718UHD Smart LED TV LE55A718UHD LE65A718UHD USER MANUAL IMPORTANT WARRANTY INFORMATION INSIDE. PLEASE READ Trademark of TEAC Corporation JAPAN www.teac.com.au... - Page 3 Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service. If you require Warranty Service, please contact the TEAC Warranty Service Hotline at 1300 553 315 for assistance. Please ensure that you have the model number, serial number and purchase receipt ready when you call.
- Page 4 Warranty, the customer shall be charged for the cost of the repair. No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it, in connection with the sale of any equipment other than as stated in this warranty and outlined above.
-
Page 5: Table Of Contents
Table of Contents TOPIC PAGE Safety Information ………………………………………………………………………………2 Product Overview ……………………………………………………………………………….5 Basic Operations ………………………………………………………………………………..6 Remote Control ………………………………………………………………………………….9 Connections ……………………………………………………………………………………...10 TV Operation ………………………………………………………….………………………...12 USB Media Playback …………………………………………………...……………………...14 PVR Recording …………………………………………………………….…………………...15 Menu Contents and Descriptions ………………………………………………………..…...17 Advanced Controls ……………………………………………………...……………………...20 Internet Connectivity ……………………………………………………………………….…...22 Audio Video Sharing …………………………………………………………………….……...26 Internet Portal ………………………………………………………………….………………...27 HBBTV System ……………………………………………………………..…………………...28... -
Page 6: Safety Information
Safety Information CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. IMPORTANT - Please read these instructions fully before installing or operating In extreme weather (storms, lightning) and long inactivity periods (going on holiday) disconnect the TV set from the mains. - Page 7 Class II Equipment: This appliance is designed in such a way that it does not require a safety connection to electrical earth. Class II Equipment With Functional Earthing: This appliance is designed in such a way that it does not require a safety connection to electrical earth, the earth connection is used for functional purposes.
- Page 8 WARNING Large TVs are fall hazards. You should use furniture straps to fix the TV to the wall and/or the entertainment cabinet, to avoid risk of injury or death due to a falling TV. (Anti-tip TV/furniture straps sold separately) Environmental Information This television is designed to be environment friendly.
- Page 9 For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS or DTS-HD and the Symbol together are registered trademarks of © DTS, Inc. DTS, Inc. All Rights Reserved. This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft.
-
Page 10: Product Overview
Product Overview • TV supports Ultra HD (Ultra High Definition - also known as 4K) which provides resolution of 3840 x 2160 (4K:2K). It equals 4 times the resolution of Full HD TV by doubling the pixel count of the Full HD TV both horizontally and vertically. Ultra HD contents are supported from HDMI, USB inputs and over DVB-T2 and DVB-S2 broadcasts. - Page 11 Accessories Included Remote Control Batteries: 2 x AAA Instruction Book Standby Notifications If the TV does not receive any input signal (e.g. from an aerial or HDMI source) for 3 minutes, it will go into standby. When you next switch-on, the following message will be displayed: “TV switched to stand-by mode automatically because there was no signal for a long time.”...
-
Page 12: Basic Operations
Basic Operations Switching On/Off To Switch the TV On Connect the power cord to a power source such as a wall socket (220-240V AC, 50 Hz). To switch on the TV from standby mode either: • Press the Standby button, Programme +/- or a numeric button on the remote control. •... -
Page 13: Remote Control
Network/Internet Settings screen will be skipped and not displayed. If you have any questions, complaints or comments regarding this privacy policy or its enforcement, please contact by email at smarttvsecurity@vosshub.com. Press OK button on the remote control to continue and the Network/Internet Settings menu will be displayed, if you confirm the previously displayed message asking whether you want to do the network settings. - Page 14 You can change the channel and adjust the volume by using the Volume +/- and Programme +/- buttons on the remote. Inserting the Batteries into the Remote Remove the screw that secure the battery compartment cover on the back side of the remote control first. Remove the cover gently. Insert two AAA batteries.
-
Page 15: Remote Control
Remote Control Source: Shows all available broadcast and content sources Netflix: Launches the Netflix application, if this feature is supported by your TV YouTube: Launches the YouTube application Play: Starts to play selected media Record: Records programmes Rapid reverse: Moves frames backwards in media such as movies Language: Switches between sound modes (analogue TV), displays and changes audio/subtitle language (digital TV, where... -
Page 16: Connections
Connections If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making any connection. After the connection is done, you can turn on the units and use them. 12 ... - Page 17 NOTE: When connecting a device the YPbPr or Back AV input, you must use the connection cables to enable connection. See the illustrations on the left table. • You can use YPbPr to VGA cable to enable YPbPr signal via VGA input. •...
-
Page 18: Tv Operation
TV Operation Using the Channel List The TV sorts all stored stations in the Channel List. You can edit this channel list, set favourites or set active stations to be listed by using the Channel List options. Press the OK/TV button to open the Channel List. - Page 19 List Schedule(*) (*) In this layout option, only the events of the highlighted channel will be listed. Prev. Time Slice (Red button): Displays the events of previous time slice. • Next/Prev Day (Programme +/- buttons): Displays the events of previous or next day. •...
-
Page 20: Usb Media Playback
USB Media Playback Media Playback via USB Input You can connect 2.5” and 3.5” inch Hard Disk Drives with external power supply or USB memory sticks to your TV by using the USB inputs of the TV. IMPORTANT! Back up the files on your storage devices before connecting them to the TV. Manufacturer will not be responsible for any file damage or data loss. -
Page 21: Pvr Recording
WARNING: Ensure that no valuable information is currently stored in the connected data storage unit, as the formatting process means that ALL DATA will be ERASED. TEAC does not take responsibility for lost data. WARNING: While Time Shift or other recording functions are running, DO NOT disconnect the data storage unit, to avoid damage or data loss. - Page 22 Watching Recorded Programmes 1. Select Recordings from the Media Browser menu. 2. Select a recorded item from the list (if previously recorded). 3. Press the OK button to view the Play Options. Select an option then press OK. 4. Press the Stop button to stop a playback and return to the Recordings. Note: Viewing main menu and menu items will not be available during the playback.
-
Page 23: Menu Contents And Descriptions
Menu Contents and Descriptions System - Picture Menu Mode You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema, Game(optional), Sports, Dynamic and Natural. Dolby Vision Modes: If Dolby Vision content is detected Dolby Vision Dark and Dolby Vision Bright picture mode options will be available instead of Cinema and Natural modes. - Page 24 System - Sound Menu Contents Volume Adjusts the volume level. Equalizer Selects the equalizer mode. Custom settings can be made only when in User mode Balance Adjusts whether the sound comes from the left or right speaker Headphone Sets headphone volume. Please ensure before using headphones that the headphone volume is set to a low level, to prevent damage to your hearing.
- Page 25 (*) ESN number is an unique ID number for Netflix, created especially to identify your TV. More Displays other setting options of the TV. Menu Changes timeout duration for menu screens. Timeout Standby LED If set as Off the standby LED will not light up when the TV is in standby mode.
-
Page 26: Advanced Controls
Advanced Controls Configuring Parental Settings The Parental Settings menu options can be used to prohibit users from viewing of certain programmes, channels and using of menus. These settings are located in the System>Settings>Parental menu. To display parental lock menu options, a PIN number should be entered. After coding the correct PIN number, Parental Settings menu will be displayed. - Page 27 CEC and CEC RC Passthrough This function allows to control the CEC-enabled devices, that are connected through HDMI ports by using the remote control of the TV. 1. First, the CEC option in the System>Settings>More menu should be set as Enabled. Press the Source button and select the HDMI input of the connected CEC device from the Sources List menu.
-
Page 28: Internet Connectivity
Internet Connectivity Wired Connectivity To connect to a wired network, you must have a modem/router connected to an active broadband connection. Connect your PC to your modem/router. This can be a wired or wireless connection. Connect your TV to your modem/router via an ethernet cable. There is a LAN port at the rear (back) of your TV. - Page 29 Advanced Settings Highlight Advanced Settings and press the OK button. On the next screen you can change the IP and DNS settings of the TV. Highlight the desired one and press the Left or Right button to change the setting from Automatic to Manual. Now you can enter the Manual IP and / or Manual DNS values.
- Page 30 If the selected network is protected with a password, please enter the correct key by using the virtual keyboard. You can use this keyboard via the directional buttons and the OK button on the remote control. Wait until the IP address is shown on the screen. This means that the connection is now established. To disconnect from a wireless network, highlight Network Type and press Left or Right buttons to set as Disabled.
- Page 31 Connectivity Troubleshooting Wireless Network Not Available Ensure that any firewalls of your network allow the TV wireless connection. Try searching for wireless networks again, using the Network/Internet Settings menu screen. If the wireless network does not function properly, try using the wired network in your home. Refer to the Wired Connectivity section for more information on the process.
-
Page 32: Audio Video Sharing
Audio Video Sharing Select the desired media type on the main media browser menu and press OK. If sharing configurations are set properly, Device Selection screen will be displayed after selecting the desired media type. If available networks are found, they will be listed on this screen. Select media server or network that you want to connect to using the Up or Down buttons and press OK. -
Page 33: Hbbtv System
In the initial screen of the browser, the thumbnails of the predefined (if any) links to web sites available will be displayed as Speed Dial options along with the Edit Speed Dial and the Add to Speed Dial options. • To navigate the web browser, use the directional buttons on the remote or a connected mouse. - Page 34 HbbTV allows the applications to be retrieved both from broadband or broadcast. The broadcaster may enable both ways or one of them. If the platform does not have an operational broadband connection, the platform can still launch applications transmitted on broadcast. The autostart Red button applications generally provide links to other applications.
-
Page 35: Smart Center
Smart Center Smart Center is a mobile application running on iOS and Android platforms. With your tablet or phone, you can easily stream your favourite live shows and programmes from your smart TV. Also; you can launch your portal applications, use your tablet as a remote control for your TV and share media files. Note: Being able to use all functions of this application depends on the features of your TV. - Page 36 • Change TV (Only in iOS): Shows the currently connected TV. You can press on this setting to go to the “TV search” screen and change to a different TV. • Edit custom channel list: You can edit your custom channel list using this setting. •...
- Page 37 Requirements 1. Smart TV 2. Network connection 3. Mobile Device based on Android or iOS platform (Android OS 4.0 or higher; IOS 6 or higher version) 4. Smart Center app.(to be found on online application stores based on Android and iOS platforms) 5.
-
Page 38: Upgrade And Troubleshooting
Upgrade and Troubleshooting Software Upgrade Your TV is capable of finding and updating the firmware automatically via the broadcast signal or via Internet. Software upgrade search via user interface On the main menu select System>Settings and then More. Navigate to Software upgrade and press the OK button. -
Page 39: Specifications
Specifications LE43A718UHD TV Broadcasting PAL BG/DK/II’ SECAM BG/DK VHF (BAND I/III) - UHF (BAND U) - Receiving Channels HYPERBAND Number of Preset Channels 1000 Channel Indicator On Screen Display RF Aerial Input 75 Ohm (unbalanced) Operating Voltage 220-240V AC, 50Hz. - Page 40 Specifications LE49A718UHD TV Broadcasting PAL BG/DK/II’ SECAM BG/DK VHF (BAND I/III) - UHF (BAND U) - Receiving Channels HYPERBAND Number of Preset Channels 1000 Channel Indicator On Screen Display RF Aerial Input 75 Ohm (unbalanced) Operating Voltage 220-240V AC, 50Hz. Audio DTS TruSurround HD Audio Output Power (WRMS.) (10% THD)
- Page 41 Specifications LE55A718UHD TV Broadcasting PAL BG/DK/II’ SECAM BG/DK VHF (BAND I/III) - UHF (BAND U) - Receiving Channels HYPERBAND Number of Preset Channels 1000 Channel Indicator On Screen Display RF Aerial Input 75 Ohm (unbalanced) Operating Voltage 220-240V AC, 50Hz. Audio DTS TruSurround HD Audio Output Power (WRMS.) (10% THD)
- Page 42 Specifications LE65A718UHD TV Broadcasting PAL BG/DK/II’ SECAM BG/DK VHF (BAND I/III) - UHF (BAND U) - Receiving Channels HYPERBAND Number of Preset Channels 1000 Channel Indicator On Screen Display RF Aerial Input 75 Ohm (unbalanced) Operating Voltage 220-240V AC, 50Hz. Audio DTS TruSurround HD Audio Output Power (WRMS.) (10% THD)
- Page 43 Wireless LAN Transmitter Specifications Frequency Ranges Max Output Power 2400 - 2483,5 MHz (CH1-CH13) < 100 mW 5150 - 5250 MHz (CH36 - CH48) < 200 mW 5250 - 5350 MHz (CH52 - CH64) < 200 mW 5470 - 5725 MHz (CH100 - CH140) <...
- Page 44 PC Input Typical Display Modes The following table is an illustration of some of the typical video display modes. Your TV may not support all resolutions. Index Resolution Frequency 640x350 85Hz 640x480 60Hz 640x480 72Hz 640x480 75Hz 800x600 56Hz 800x600 60Hz 800x600 72Hz...
- Page 45 AV and HDMI Signal Compatibility Source Supported Signals Available (SCART) SECAM NTSC4.43 NTSC3.58 RGB 50/60 Side AV SECAM NTSC4.43 NTSC3.58 YPbPr 480i, 480p 60Hz 576i, 576p 50Hz 720p 50Hz,60Hz 1080i 50Hz,60Hz HDMI 480i, 480p 60Hz 576i, 576p 50Hz 720p 50Hz,60Hz 1080i 50Hz,60Hz 1080p...
- Page 46 Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cable (DVI to HDMI cable - not supplied), you can refer to the following resolution information. 56Hz 60Hz 66Hz 70Hz 72Hz 75Hz 640x480 800x600 ...
- Page 47 Product Specifications Commercial Brand: TEAC Model No. LE43A718UHD Energy efficiency class Visible screen size (diagonal,approx.) (inch/cm) 43 inches / 109 cm Visible screen size (diagonal,approx.) (inch/cm) 54,0 Annual energy consumption (kWh/annum) Standby power consumption (Watt) 0,50 Off mode power consumption (Watt)
- Page 52 In the event of a product failure within the warranty period, please call the TEAC Warranty Service Hotline 1300 553 315 Between Monday to Friday - 8.30AM to 5PM AEST *Please have your purchase receipt and the product’s serial number ready For other enquiries and support please visit www.teac.com.au...
Need help?
Do you have a question about the LE43A718UHD and is the answer not in the manual?
Questions and answers