Setup2; Quick View; Auto Power Off; Lcd Save - Samsung S730 User Manual

Setup 2 ( )

[ Quick view ]

■ If you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
● Sub menus
[Off] : The quick view function can't be
activated.
[0.5, 1, 3 sec] : The captured image is briefly
displayed during the selected time.

[ Auto power off ]

■ This function switches the camera off after a set amount of time in order to
prevent unnecessary battery drainage.
● Sub menus
[Off] : The power off function will not operate.
[1, 3, 5, 10 min] : The power will turn off
automatically if not used for the
period of time specified.
- After replacing the battery, the power off setting
will be preserved.
- Note that the automatic power off function will not operate if the camera is in
PC / Printer mode, slide show, playing back a voice recording, playing back a
movie clip.

[ LCD save ]

■ If you set the [LCD save] to On and the camera isn't operated during the
● [LCD save] sub menu

SETUP2

Quick View Off
Power Off 0.5 sec
LCD Save 1 sec
Video Out 3 sec
Format
Reset
Back Set
OK
INFORMATION
SETUP2
Quick View
Power Off Off
LCD Save 1 min
Video Out 3 min
Format 5 min
Reset 10 min
Back Set
OK
specified time, the LCD monitor will be turned off automatically.
[Off]: The LCD monitor will not be turned off.
[On]: If you select the [LCD Save] and the camera
isn't operated during the specified time(about
30 SEC.), the camera power will be idle(LCD
monitor : OFF, Camera status lamp :
Blinking) automatically. To use the camera
again, press any of the camera buttons
except the power button.
● After replacing the battery or connect the AC adapter again, the poweroff
setting will be preserved.
● Note that the LCD save function will not operate if the camera is in PC /
Printer mode, slide show and playing back a movie clip.
SETUP2
Quick View
Power Off
LCD Save Off
Video Out On
Format
Reset
Back OK Set
《35》