Flash / Left Button - Samsung S730 User Manual

Flash ( ) / Left button
■ When the menu is displayed on the LCD monitor,
pressing the LEFT button makes the cursor shift to
the left tab.
■ When the menu is not displayed on the LCD
monitor, the LEFT button operates as the FLASH
( ) button.
● Selecting the flash mode
1. Rotate the MODE DIAL to select a RECORDING mode with the exception of
Movie clip mode.
2. Press the Flash button until the desired flash mode indicator displays on the
LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
● Flash range
Normal
ISO
WIDE TELE
AUTO 0.8~3.0 0.8~2.5
[ Selecting the Auto flash ]
Macro Auto macro
WIDE TELE WIDE
0.3~0.8 0.4~0.8 0.3~3.0
INFORMATION
● Using the flash frequently will reduce the life of the battery.
● Under normal operating conditions the charging time for the flash is
normally within 5 seconds. If the battery is weak, the charging time will be
longer.
● During the continuous shot, AEB, some scene modes (p.26) and movie clip
mode, the flash function will not operate.
● Take photographs within the flash range.
● The image quality is not guaranteed if the subject is too close or highly
reflective.
● When taking an image in poorly lit conditions with the flash, there may be a
white speck in the captured image. The speck is caused by the reflecting of
the flash light from the atmospheric dust. It is not camera malfuction.
(Unit : m)
TELE
0.4~2.5
《25》