Samsung 740NW Service Manual page 51

11 Disassembly and Reassembly
설 설 명 사 사 진 설명
Description
3. Turn the monitor so that its front part is looking
downwards. Then remove the back cover, as
shown in the figure on the left.
4. Remove the lamp protection shield on the left of
the shield (back cover). Then remove the two
(2) lamp wires and the function connector.
(Be careful Shield.)
5. Lift up the shield. Check and remove the
connections between the FFC cable and the
panel. Then remove the shield from the panel.
11-2
Picture Description
Lamp Protection Shield