Samsung NV40 User Manual page 41

Self-timer / Remote control
■ Motion Timer
Motion
Pressing the shutter button after
setting the Motion Timer
Detecting the subject's movement Blink (0.25 second interval)
No movement is detected
■ The Motion Timer flows are as followings. (Movie Clip mode excluded)
Selecting the Motion Timer  Pressing the Shutter button  Confirming the
composition (Within 6 sec.)  Starting the detection (Swing your hands
*1
fully)  Stopping the detection (Do not move)  Taking an image (after 2
*2
sec.)
*1 : The camera detects the subject's movement 6 seconds after pressing the
Shutter button, so confirm the composition within 6 seconds.
: Move your body or hands fully.
*2
<< 40 >>
Icon & Self-timer lamp
Blink (1 second interval)
Turn on and the image is taken after
2 seconds
In the following cases, the Motion Timer may not operate.
● The focus distance is over 3m.
● The exposure is too bright or dark.
● In backlight conditions.
● The movement is insignificant.
● The movement is detected beyond the
center part (50%) of the sensor where the
movement is recognized.
● If the camera doesn't sense any movement
for 30 seconds, or the camera doesn't sense
stillness after sensing movement.
[The detection range of
Motion Timer]