Self-Timer / Remote Control - Samsung NV40 User Manual

Self-timer / Remote control

This function is used when the photographer would also like to be in the
picture.
- Selecting a self-timer :
When you press the 'shutter' button, the picture
will be taken after the specified time has
elapsed and the self-timer function will stay on.
- Selecting a remote mode :
Pressing the shutter button of a separate remote
control will allow an interval of 2 seconds before
the image is taken. After taking a picture, the
remote mode will be maintained.
But, pressing the Power button will cancel the remote mode.
■ Description of Self-timer / Remote mode
Icon Mode
OFF You can not use the self-timer function.
Pressing the shutter button will allow an interval of
10 SEC
10 seconds before the image is taken.
Pressing the shutter button will allow an interval of
2 SEC
2 seconds before the image is taken.
A picture will be taken after about 10 seconds and
DOUBLE
2 seconds later a second picture will be taken.
The camera detects the subject's movement 6 seconds
MOTION
after pressing the Shutter button, and the picture is
TIMER
taken when the movement is stopped.
You can take a picture by remote control instead of
REMOTE
using the shutter button of the camera.
DOUBLE
2 SEC
10 SEC
OFF
Description
■ Remote control range
When you take a picture by using the remote control,
refer to the illustrations shown alongside about the
remote control range.
[Shutter button on the
remote control]
■ Replacing battery for the remote control
Make sure the + (positive) polarity is toward the top and the - (negative)
polarity is toward the bottom while installing battery for the remote control.
Replace battery for the remote control in the local service centre.
Use the CR 2025 3V battery.
● When taking a picture using the self-timer, the self-timer lamp works
as follows :
10 second self-timer setting :
The self-timer lamp blinks at 1 second interval for the first 7 seconds.
It blinks at 0.25 second interval for the remaining 3 seconds.
2 second self-timer setting :
The self-timer lamp blinks at 0.25 second interval for 2 seconds.
● If you operate the Back button during the self-timer operation, the
self-timer function is canceled.
● Use a tripod to prevent camera shake.
<< 39 >>