How To Diagnose - Launch DBScar User Manual

LAUNCH DBScar User's Manual

7.2.5 How to diagnose

After you finished activating DBScar connector, device
configuration and updating, click [Diagnostics], the system
will enter Fig. 7-38. Otherwise, a dialog box as shown in Fig.
7-39 will appear if the selected vehicle does not match with the
current DBScar. Click [Update] to synchronize it; click [Yes] to
continue.
After the system loads all diagnostic programs, a screen similar
to Fig. 7-40 will appear.
Click the desired one to enter Fig. 7-41
Fig. 7-38 Fig. 7-39
23