The devices in the JUMO dTRANS T/S08 series can be installed on a DIN rail or on a power rail. For marine applications the
devices must be supported by a module stop (TN: 00697615). Power supply units can be mounted on the power rail according
to customer requirements.
If you want to install a JUMO dTRANS T/S08 device with power rail connectors on a standard DIN rail, the head of the screws
holding the 7.5 mm DIN rail shall be no more than 3.5 mm high in order to avoid short circuit between the power rail
connectors on the device and the screws.
It is possible to supply the power rail via the supply terminals.
The terminals can pass a current of max. 400 mA.
The front cover of the JUMO dTRANS T/S08 devices has been
designed with an area for affixation of a click-on marker. The
area assigned to the marker measures 5 x 7.5 mm. Markers
from Weidmüller's MultiCard System, type MF 5/7.5, are
suitable.
8
Installation on DIN rail / power rail
35 mm
> 24 mm
Supply of power rail
Marking
V1.00/EN/00698691 - 70720300T90Z001K000
< 3.5 mm
Screwable module
stop for rail profile