Software Manual - Samsung Digimax350 SE User Manual

SOFTWARE MANUAL

Please ensure that you read the instruction manual carefully before using
Software Notes
The attached software is a camera driver and image editing software tool for Windows.
Under no circumstances should all or part of either the software or the user manual be
reproduced.
Copyright for both software is licensed only for use with a camera.
In the unlikely event of a manufacturing fault, we will repair or exchange your camera.
We cannot, however, be held responsible in any way for damage caused by
inappropriate use.
Using Hand-made PC or a PC that have not been guaranteed by the manufacturer are
not covered by Samsung warranty.
Before reading this manual, you should have a basic knowledge of computers and O/S
(Operating Systems).
Windows is a registered trademark of Microsoft.
Macintosh, Mac is the registered trademark of Apple computer, USA.
About softwares
USB Storage Driver
This camera uses USB Storage Driver as the camera driver. You can use the camera as
a USB card reader. After installing the driver and connecting this camera to the PC, you
can find [Removeable Disk] in [Windows Explorer] or [My computer].
USB Storage Driver is provided only for Windows.
USB Driver for MAC is not included with the Application CD. But you can use the
camera with Mac OS 9.x.
Digimax Viewer
You can see the stored images in the CF CARD directly on the PC monitor. And you
can copy, move, delete the image and scale up /downscale the image size with
Digimax Viewer. For windows only.
MGI PhotoSuite
Image editing program for downloaded image.
For Windows only.
SE