Advertisement
5. Fasten the mount kit on the pole with nut screws and with torque of 20 kgf-cm.
Note
6. Fasten the access point to the mount kit with screws (torque of 20 kgf-cm) as
shown in the following figure.
Note
Before connecting the access point to the mount kit, make sure it is
oriented with the LED indicators pointing downwards.
The diameter for a pole shall be limited between 35mm to 53mm.
Advertisement
Need help?
Do you have a question about the VigorAP 920R Series and is the answer not in the manual?
Questions and answers