SIKA P350 User Manual

Hydraulic
Pressure Testpump
Type P350
USER MANUAL
Provides hydraulic pressure of 0 to 350 bar
Always release the internal pressure at the connectors before
disconnecting. Uncontrolled release of high pressure can
result in personal injury and damage to equipment. Excessive
pressure can crack or break the fluid reservoir case!
Reservoir fluid level:
If the fluid level in the reservoir falls considerably during use, a partial vacuum may be created in
the reservoir that can affect the performance of the pump. To avoid this, simply allow air to enter
the reservoir by partly unscrewing the filling plug.
Seal replacement:
Depending on the frequency of use, the main piston seal (and others) may need replacing.
Replacement seals and instructions for fitting are contained in the seal kit
P350 Controls and orientation:
JSP, s.r.o., Raisova 547, 506 01 Jičín, Czech Republic
Phone: +420 493 760 811, Fax: +420 493 760 820, e-mail: jsp@jsp.cz
SIKA, Dr. Siebert & Kühn GmbH & Co. KG, Struthweg 7-9, 34260 Kaufungen, Germany
Tel: +49-5605-803-0, Fax: +49-5605-803-54, email: info@SIKA.net, web: www.SIKA.net
JSP Industrial Controls
www.jsp.cz
1/4