Connecting To A Power Source - Samsung DIGIMAX 202 User Manual

Identification of features
Camera status lamp
Color
Blinking and off
Green
Blinking slowly
Self-timer lamp (Based on 10-second Self-timer; see p.29)
Color Status
Blinking
Red
Blinking once time
Beep
Beep sound
Power beep
Normal beep (a short beep)
Error beep (long beep twice and
short beep twice)
Self-timer beep
- To hear the beep sound, you have to set the beep sound to on in the setup mode menu.

Connecting to a Power Source

There are two ways in which to provide the camera with power. You can use batteries or
alternatively, you can use an AC(100 ~ 250V) Adapter (DC 3.3V 2.0A).
We recommend using batteries for a digital camera.(Within a year from the date of
manufacture) The batteries are listed below.
Non rechargeable batteries
Rechargeable batteries
14
Status
Power on processing
When the LCD monitor is turned off
On
When the USB cable is connected
Flash recharging
Image processing(compression/decompression)
Blinking fast
USB busy
- For the first seven seconds, the LED blinks at 1second intervals.
- For the final three seconds, the LED blinks quickly at 0.5-second intervals.
When the camera's power is on / when the shutter button is released.
Beeps simultaneously with the Self-timer lamp blinking.
: AA type
CR-V3 type – Lithium
: AA type
CR-V3 type – Digimax Battery I-Pack(SBP-1103)
Battery pack – Digimax Battery Pack(SBP-3603)
Camera Status
Camera Status
Camera condition
When the camera power is turned on/off.
Rotating the mode dial/
pressing the camera buttons
When an error occurs
– Alkaline, Ni-Mn, Ni-Zn, Lithium
– Ni-MH, Ni-Cd (over 1000mA)