Figure 31 Driver Installation - Found New Hardware; Figure 32 Driver Installation - Install From Specific Location; Figure 33 Driver Installation - Driver Location Selection - Cortalk RMU1 Installation And Configuration Manual

Figure 32 Driver Installation - Found New Hardware
From the three choices, select the "No, not this time" radio button and click "Next >".
The following screen will ask you if you would like to install the software automatically or from a specific location.
Figure 33 Driver Installation - Install From Specific Location
Choose to install from a specific location since you have the installation CD, USB key or downloaded files. Click the
"Next >" button.
The next window will appear and ask you where to search for the drivers. The default selection is shown in Figure 34.
Figure 34 Driver Installation - Driver Location Selection
Insert the CD or USB key that came with the programming interface.
If you do not have the installation CD or USB key and know where to find the drivers, check off "Include this location
in the search:" and browse for the driver on your computer or network. You can uncheck "Search removable media
(floppy, CD-ROM...)" to save time in this case.
MOBILTEX® DATA LTD.
Calgary, Alberta
www.corTalk.com
TITLE: RMU1 Installation and Configuration Guide
DOCUMENT NO.: SHEET:
RMU1-MAN-001
REV:
35 of 53 1.14