Beep - Samsung Digimax 101 User Manual

SETTING UP THE CAMERA SYSTEM

BEEP

A beep will sound when you press the camera button and an error takes place. You can check the
camera condition by this function.
Selecting the beep sound
Steps 1 to 5 are the same as those for selecting the SETUP
mode.(p.68)
6. Press UP( ) /DOWN( ) and select [BEEP].
7. Select [ON] or [OFF] by pressing the LEFT( )/ RIGHT( )
button. The default is [ON].
8. Press the Ok button to confirm the setting.
Beep sound
Beep
System ready
1 time Starting the self-timer function
When a button is pressed
When an error message display on the LCD monitor
3 times
When a system error takes place
Camera condition
SETUP 1/3
BEEP
FORMAT
POWER OFF
RESET
ON OFF
69