Advertisement
DETACHING QUICK ATTACH DEVICE
(Figures 1 & 2)
WARNING: To avoid injury during installa-
tion/removal of the loader attachment, do not
allow bystanders within 10 feet of loader or
attachment.
1. Locate tractor and loader on level ground.
Figure 2
Quick Attach Device
F-4259
2. Lower boom arms until the attachment is level and
resting on ground.
3. Place tractor in neutral, set parking brake, shut off
tractor engine and disengage quick attach device
latch pins by moving handles to unlatch position.
4. Start tractor engine, release brake and extend
bucket cylinders while slowly backing the
tractor away from attachment, until quick attach
disengages from attachment.
Page 3 of 4
2-7702
06-02-09
Advertisement
