Samsung C4235(P) User Manual page 10

2).When.the.voltage.is.supplied.to.both.ports
Function
Code
A
B
C
D
*.2.:.. F or.short.voltage.supply.during.MENU.OFF,.executes.
ONEAF.and.for.more.than.2.second
*.3.:.. F or.more.than.2.second.long.voltage.supply,.moves.to.the.
PRESET.0(HOME).position.
2 SETUP Switch
This switch is used to set the function or property. When this switch
is pressed for at least 2 seconds, the Setup menu appears.
[Left/Right] movement or changing the displayed value: By
n
pressing this switch left or right, you can move left or right on
the menu or change the displayed value.
[Up/Down] movement: By pressing this switch up or down, you
n
can move up or down on the menu.
Setting: When you press this switch in the menu, the selected
n
value or function is confirmed. To enter a submenu, press this
button.
3 Power Display LED.
When the power is normally connected, the red LED lights.
4 Video OUT Jack.
This is connected to the Video Input jack of the monitor and it
outputs the Video signals.
5 Power Connection Jack
This is connected to the Power cable.
10
ENTER/AF *2
ZOOM Port FOCUS Port
-6V
-6V
+6V
+6V
.
HOME RETURN *
ZOOM Port
-6V +6V
+6V +6V
-6V -6V
+6V -6V
FOCUS Port
+6V
-6V
+6V
-6V