Using The Batteries - Samsung Digimax A63 User Manual

Connecting to a Power Source
DANGER
Always turn off the power before taking the AC adapter out of the mains supply.
As with all mains powered devices, safety is important. Ensure that neither the camera
nor adapter comes into contact with water or metallic materials.
Please ensure that you use an AC adapter (3.3V 2.0A) with the correct specification for
the camera. Failure to do so may affect your warranty.

Using the batteries

[Inserting the AA type battery]
There are 3 indicators for battery condition that are displayed on the LCD monitor.
Battery indicator
Battery status
16
: If the camera does not turn on after you have inserted batteries,
please check whether the batteries are inserted with the correct
polarity(+/-).
1. Open the battery chamber cover by pushing in the direction of the
arrow.
[ Inserting the CR-V3 type battery ]
3. To close the battery chamber cover, push it until it clicks.
The batteries are fully
charged.
2. Insert the batteries taking note of the
polarity (+ / -).
Prepare new batteries.
There is no battery capacity.
Replace with new batteries.