Sharper Image 204952 Owner's Manual page 2

HEADPHONE OVERVIEW
LEFT SIDE
1. LED Indicator
(For Bluetooth, battery condition)
2. Multifunction Button (MFB)
Switch ON/OFF, Pairing, Answer/End/
Reject Call/Next track (Only for Bluetooth)
3. Microphone
4. USB Socket (For Charging)
RIGHT SIDE
5. Noise Cancelling LED Indicator
6. Noise Cancelling ON/OFF Switch
7. 3.5mm Audio Jack
ADJUSTING THE HEADBAND
• In order to achieve maximum comfort and noise
cancellation, the headband should be adjusted
to properly fi t your head with the ear cups sitting
comfortably over your ears.
CHARGING THE HEADPHONES
Prior to use, charge your headphone unit by connecting the included charging cable into a
USB power outlet (such as USB chargers or computer USB ports) and plug the other end into
the headphone's micro USB charging port. The LED indicator (1) will light up red showing that
the unit is being charged. When charging is complete, the red LED indicator (1) will turn off .
ACTIVE NOISE CANCELLING MODE
• To power ON the noise cancelling function, set the noise cancelling ON/OFF switch upwardly.
The Noise Cancelling LED indicator (5) will light up in blue. Note: After you turn ON the power, you
might hear a slight hissing noise. This is a normal function and will cease after a few seconds.
• When the battery is running low, the Noise Cancelling LED indicator (5) will become dim.
• Once the battery is fully drained, the active noise cancelling feature will turn off but the audio
signal from the music player will continue to transmit.
• In quiet environments where noise cancellation is not required, these headphones can also be
used like conventional headphones, without the use of battery.
• When not in use, switch the noise cancelling ON/OFF button downwardly to extend battery life.
LEFT SIDE
RIGHT SIDE
- 2 -