Table of Contents
Advertisement
O
P E R AT I O N
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., "CBS", "ESPN",
"PBS2", CNN1", etc.) A label consists of four fields, where each field is a letter, a num-
ber, "*", or a blank. When the DISPLAY button is pressed, the channel label will appear
next to the channel number.
1
Press CH
the channel that will be
labeled.
2
Press MENU to display the
menu.
Press CH
"Channel".
Press VOL +.
3
Press CH
"Labeling".
Press VOL + to begin labeling.
The left-most field will be high-
lighted.
(Each label has four fields. See
top paragraph.)
4
Press the CH
ton to select a letter, a number,
"*", or a blank. (Pressing CH
results in this sequence:
A,B,...Z,*, blank,0,1,...9).
5
Press VOL+ to switch to the
next field, which will be high-
lighted. Select a second letter
or digit using the CH
Repeat the process to select
the last two digits.
Press MENU twice to set the label and clear the menus from
the screen.
3.9
C
T
: TV O
HAPTER
HREE
PERATION
or CH
to tune to
twice to select
five times to select
or CH
but-
and CH
buttons, as above.
Note: You cannot select
"Labeling" in the A/V mode.
Advertisement
Table of Contents
