Table of Contents
Advertisement
Memorizing the Channels
Your TV can memorize and store all of the available channels for both "off-air" (antenna) and cable channels.
After the available channels are memorized, use the CH
This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the
TV (i.e. an antenna or a cable system).
TV
Air/Cable
:
Auto Program
Add/Delete
Name
Fine Tune
Move
Enter
TV
Air/Cable
:
Auto Program
Add/Delete
Name
Fine Tune
Move
Enter
Storing Channels in Memory (Automatic Method)
TV
Air/Cable
:
Auto Program
Add/Delete
Name
Fine Tune
Move
Enter
Search
Stop
Enter
Return
1. Press the MENU button to display the menu.
Channel
Press the ... ... or † † button to select "Channel", then press the ENTER button.
√ √
Air
√ √
√ √
√ √
√ √
Return
2. Press the ENTER button to select "Air/Cable".
Channel
Press the ... ... or † † button to select "Air", "STD", "HRC", or "IRC", then press
Air
the ENTER button.
STD
HRC
Press the EXIT button to exit.
IRC
Return
1. Press the MENU button to display the menu
Channel
Press the ... ... or † † button to select "Channel", then press the ENTER button.
√ √
Air
√ √
2. Press the ... ... or † † button to select "Auto Program", then press the ENTER
√ √
button.
√ √
√ √
Return
3. Press the ENTER button to start the auto program.
The TV begins memorizing all available channels.
Air
31
Press the ENTER button at any time to interrupt the memorization process.
Press the EXIT button to exit.
You can also press the
Auto Program menu.
or CH
button to scan through the channels.
AUTO PROG.
English-16
.
button on the remote control to bring up the
Advertisement
Table of Contents
