Table of Contents
Advertisement
Using the "-" Button
Using the PRE-CH Button to select the Previous Channel
Adjusting the Volume
Using Mute Button
At any time, you can cut off the sound using the MUTE button.
Viewing the Display
The display identifies the current channel and the status of certain audio-video settings.
Air
3
Mono
Picture: Dynamic
Sound
: Custom
MTS
: Stereo
12:00 am
Viewing the Menus
TV
Source List : TV
Edit Name
Move
Enter
1. To select a channel over 100, for channel 122, press "-", then "2", then "2".
1. Press the PRE-CH button.
The TV will switch to the last channel viewed.
➢
To quickly switch between two channels that are far apart, tune to one channel,
then use the number button to select the second channel. Then use the PRE-CH
button to quickly alternate between them.
1. Press the VOL + or VOL – button to increase or decrease the volume.
1. Press MUTE and the sound cuts off.
2. To turn mute off, press the MUTE button again, or simply press the
VOL + or VOL – button.
1. Press the INFO button on the remote control.
The TV will display the channel, the type of sound, and the status of certain
picture and sound settings.
Press the INFO button once more or wait approximately 10 seconds and it disappears
automatically.
1. With the power on, press the MENU button.
Input
The main menu appears on the screen. Its left side has five icons:
√ √
Input, Picture, Sound, Channel, Setup.
√ √
2. Use the ... ... or † † button to select one of the five icons.
Then press the ENTER button to access the icon's sub-menu.
3. Press the EXIT button to exit.
Return
➢
The on-screen menus disappear from the screen after two seconds.
English-15
Advertisement
Table of Contents
