Memorizing The Channels; Selecting The Video Signal-Source - Samsung TX-R2664WA Owner's Instructions Manual

O
P E R AT I O N

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (antenna)
and cable channels. After the available channels are memorized, use the CH
CH buttons to scan through the channels. This eliminates the need to change
channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and
deleting channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button.
Press the ▲ or ▼ button to
select "Channel", then press the
ENTER button.
2
Press the ▲ or ▼ button to
select "Air/CATV".
3
Press the œ œ or √ √ button to
select "Air" (antenna), "STD",
"HRC", or "IRC" (all cable TV).
Channel
√ √
Auto program
√ √
Add/Delete
Fine tune : 00
Air/CATV : Air
Name : - - - -
Move Enter Return
Channel
√ √
Auto program
√ √
Add/Delete
Fine tune : 00
œ œ Air √ √
Air/CATV
Name : - - - -
Move Adjust Return
Channel
√ √
Auto program
√ √
Add/Delete
Fine tune : 00
œ œ Air √ √
Air/CATV
Name : - - - -
Move Adjust Return
English - 26
œ STD, HRC and IRC identify
various types of cable TV
systems. Contact your local cable
company to identify the type of
cable system that exists in your
particular area.
continued...
and