Table of Contents
Advertisement
LI-ION CAR CHARGER (11038)
•
Connect the Li-Ion Car Charger (11038) first to the 12V (or
24V) power socket and then to the Li-Ion battery.
•
Charge progress is displayed by a red LED.
•
After approx. 180 minutes of charging, a green LED indicates
that the battery is charged up to 95%
ELB 500 HEAD
ELB 500 HEAD CHARACTERISTICS
The new ELB 500 Head features an ultra-compact design with
flexible 2.5 m cable, and 7 mm umbrella shaft.
Enjoy the universal use: a single head for seamless transition from
lower shutter speeds up to Hi-Sync and back, both in TTL and
manual modes!
Experiment with the full range of Quadra accessories thanks to the
Q mount. Use Quadra Reflector Adapter MK-II (26342) to use the
full sized Elinchrom accessory system.
Implements a daylight 14W LED Modelling lamp with 5200 K and
90 CRI, adjustable in 40 steps.
ACCESSORY REMOVING / FITTING ADVICE
1.
Always switch the power pack off, before attaching accessories.
2.
Mount the ELB 500 head onto a tripod and lock the security
screw.
3.
Press the ELB 500 head locking knob firmly down and turn the
reflector to the left.
4.
Now pull the reflector from the head and replace with another
reflector.
EN
25
Hide quick links:
Advertisement
Table of Contents
