Troubleshooting - Samsung CL-29Z30, CL-29Z40, CL-29Z50, CL-29Z57, CL-29Z58 Owner's Instructions Manual

Sound -
Mode / Custom / MTS / Auto Volume /
Turbo Sound / Pseudo Stereo
 Mode: Standard/Music/
Movie/Speech/Custom
Mode
You can select the type of
Custom
special sound effect to be
MTS
used when watching a given Auto Volume
broadcast. ▼ More
➢
Press the S.MODE Move
button on the remote
control to select one of the standard sound settings.
 Custom: Bass/Treble/Balance
The TV has several settings which allow you to control the
sound quality.
➢
If you make any changes to these settings, the sound
mode is automatically switched to "Custom".
 MTS (Multi-channel Television Sound)
Depending on the particular program being broadcast, you
can listen to Mono, Stereo, or SAP.
➢
Press the MTS button on the remote control
repeatedly to select "Stereo", "Mono", or "SAP"
(Secondary Audio Program).
 Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is
low.
 Turbo Sound
This feature emphasizes the bass and treble frequencies
to add fullness to the sound.
➢
Press the TURBO button on the remote control
repeatedly to select "Off", "Plus" or "Voice".
 Pseudo Stereo
This feature converts a monaural sound signal into two
identical left and right channels. Once the "Pseudo Stereo"
is set to "On" or "Off", the setting applies to the sound
effects such as "Standard", "Music", "Movie" and "Speech".

Troubleshooting

If the TV seems to have a problem, first try this list of possible
problems and solutions. If none of these troubleshooting tips
apply, then call your nearest Samsung authorized service
center.
Sound
: Custom ►
Poor picture.
►
 Try another channel.
: Stereo ►
 Adjust the antenna.
: Off ►
 Check all wire connections.
Enter Return
Poor sound quality.
 Try another channel.
 Adjust the antenna.
No picture or sound.
 Try another channel.
 Press the SOURCE button.
 Make sure the TV is plugged in.
 Check the antenna connections.
 Make sure the MUTE button is off.
No color, wrong colors or tints.
 Make sure the program is broadcast in color.
 Adjust the picture settings.
Picture rolls vertically.
 Adjust the antenna.
 Check all wire connections.
 If you are using a VCR, check the tracking.
The TV operates erratically.
 Unplug the TV for 30 seconds, then try operating it again.
Your remote control does not operate your TV.
 Make sure the remote has batteries.
 Check that the "+" and "-" ends of the batteries are
inserted correctly.
 Check that the batteries are drained.
continued...
English - 7
The TV won't turn on.
 Make sure the wall outlet is working.
 Make sure the TV is plugged in.
 Make sure the remote has batteries.
Remote control malfunctions
 Replace the remote control batteries.
 Clean the upper edge of the remote control (transmission
window).
 Check that the "+" and "-" ends of the batteries are
inserted correctly.
 Check that the batteries are drained.