Remote Control - Samsung CL-29Z30, CL-29Z40 Owner's Instructions Manual

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV. When using the remote control, always point it directly at
the TV. You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box.
1 POWER
Turns the TV on and off.
2 NUMERIC BUTTONS
Press to change the channel.
3 –
Use to select a channel over 100, For
example, for channel 122, press "-",
then "2", then "2".
4 + VOL –
Press to increase or decrease the
volume.
5 MENU
Displays the main on-screen menu.
6 UP... ... / DOWN† † / LEFTœ œ / RIGHT√ √ /
ENTER
Use to select on-screen menu items
and change menu values.
7 S.MODE
Press to select the sound mode.
8 P.MODE
Press to select the picture mode.
9 CAPTION
Controls the caption decoder.
0 MTS
Press to choose stereo, mono or
Separate Audio Program (SAP
broadcast).
! R.SURF
Press to automatically return to a
preferred channel after a user-preset
time delay.
@ TURBO
Press to select Turbo sound.
# SOURCE
Press to display all of the available
➢
This is a special remote control for the visually impaired, and has Braille points on the
Power, Channel and Volume buttons.
English-7
video sources.
$ INFO
Press to display information on the TV
screen.
% PRE-CH
Tunes to the previous channel.
^
CH
Press to change channels.
& EXIT
Press to exit the menu.
* MUTE
Press to temporarily cut off the sound.
( P.SIZE
Press to change the screen size.
) SLEEP
Press to select a preset time interval
for automatic shut off.
a PIP (depending on the model)
Picture-in Picture ON/OFF.
b CH (depending on the model)
Displays the available channels in
sequence. (These buttons change
channels in the PIP window only.)
c SWAP (depending on the model)
Switches the main and sub (PIP)
picture.