Safety Devices; Meaning Of The Warning Notes; Product Standards, Safety Regulations - Welch MP 601 E Operation Manual

1.5

Safety Devices

Measures such as the following are for the safety of the operating personnel:
electrical connection with a protective conductor (operating mode S1) and an earthing
plug
Motor protection device (thermal)
"Hot Surface" label on the pump body - warning notice
The diaphragm pump must not be operated without these elements.
1.6

Meaning of the Warning notes

Take note of the warning notices. They are in the following box:
Hazard which may lead to serious injuries or material damage.
1.7

Product Standards, Safety Regulations

Diaphragm Pumps meet the following product standards:
DIN EN ISO 12100:2011-03
DIN EN ISO 13857:2008-06
DIN EN 1012-2:2011-12
DIN EN ISO 2151:2009-01
DIN EN ISO 2151:2009-01
DIN EN 61000-6-2:2011-06
DIN EN 61000-6-4:2011-09
DIN EN 61010-1/A1:2015-04
DIN EN 50110-1:2014-02
DIN EN 1127-1:2011-10
DIN EN 13463-1:2009-07
DIN EN 13463-5:2011-10
Directive 2012/19/EU
Directive 2011/65/EU
China - RoHS II
The following additional safety regulations apply in the FR Germany:
BGV A3
VBG 5
BGR 120
BGI 798
BGG 919 (VBG 16)
BGR 189 (BGR 195;192;197)
Observe the standards and regulations applying in your country when you use the dia-
phragm pumps.
412721
Safety of machinery -
General principles for design - Risk assessment and risk reduction
Safety of machinery - Safety distances to prevent hazard zones being reached
by upper and lower limbs
Compressors and vacuum pumps - Safety requirements -
Part 2: Vacuum pumps
Acoustics - Noise test code for compressors and vacuum pumps - Engineering
method (grade 2)
Safety of machinery - Electrical equipment of machines -
Part 1: General requirements
Electromagnetic compatibility (EMC) -
Part 6-2: Generic standards - Immunity for industrial environments
Part 6-4: Generic standards - Emission standard for industrial environments
Safety requirements for electrical equipment for measurement, control and
laboratory use - Part 1: General requirements
Operation of electrical installations
Explosive atmospheres - Explosion prevention and protection -
Part 1: Basic concepts and methodology
Non-electrical equipment for use in potentially explosive atmospheres -
Part 1: Basic method and requirements
Part 5: Protection by constructional safety 'c'
Electrical and electronics - old devices (WEEE)
Dangerous materials in electrical and electronics devices (RoHS II)
Environment protection law - China 2016-01
Electrical equipment and operating materials
Power-driven machines
Guidelines for laboratories
Hazard assessment in the laboratory
Accident prevention regulations for "compressors"
Use of protective working clothes
Important Information
CAUTION ! / WARNING !
5