Lorex FS21FBK Quick Start Manual

HD Wi-Fi Indoor Security Camera
Quick Start Guide
English / Español
What's Included
1 HD Wi-Fi
Security
Camera
2 Mounting
Screws
1 Power
Adapter
NOTE: Camera configuration, memory card size, power adapter plug, and
the number of accessories may vary by model. Please refer to your package
for specific details. Your accessories might appear different from the ones
depicted in this guide.

Camera Overview

1.
1
2
3
4
5
2. Camera Lens
3. Speaker
10
10
11
12
13
fxc003484156
12
lorextechnology.com
© 2017 FLIR Systems, Inc.
FXCX2_LS_QSG_EN_SP_R2
1 Mounting
Plate
(Pre-attached)
2 Drywall
Anchors
1 microSD
Card
(Pre-installed)
Status LED
Steady Red: Camera is starting up or resetting.
Slow-Flashing Red: The router or network that
the camera is connected to is down. Check your
router settings.
Steady Blue: Camera is connected to FLIR
Cloud services.
Fast-Flashing Blue: Firmware upgrade in
progress. DO NOT UNPLUG YOUR CAMERA.
Fast-Flashing Blue and Red: Firmware is
downloading and update will begin shortly.
DO NOT UNPLUG YOUR CAMERA.
Slow-Flashing Blue: Camera setup in progress.
Slow-Flashing Blue and Red: Camera is ready
for setup.
LED Off: Camera is in privacy / covert mode, or is
turned off.
4. Microphone
5. Night Vision LED
6
6. Micro USB Power Port
7
7. Reset Button
8. microSD Card Memory Slot
9. Micro USB Power Cable Holder: Secure
8
the USB power cable with this clip.
9
10. Camera Base
10. Camera Base
11. QR Code
12. Device ID
13. Mounting Plate
11
HD Wi-Fi Indoor Security Camera
For FAQs, setup guides, and support videos visit
Setup Instructions
Step One: Initial Setup
1. Plug in your camera. Camera turns on automatically when the power adapter
is connected.
1 Micro
USB Cable
3 Cable
Clips
Quick Start
Guide & Safety
Information
NOTE: See the "Installing Power Adapter Plugs (European Users Only)"
section for instructions on installing European power adapter plugs.
2. Remove the protective film on the lens.
3. Download the Lorex Secure app to your mobile device, then launch the app.
4. Tap SIGN UP and enter your email address and password to create a new
FLIR Cloud account.
NOTE: If you already have an existing FLIR Cloud account, enter your email
address and password and tap LOG IN.
Step Two: Setting Up Your Camera
NOTE: If Bluetooth (BLE) is not supported on your mobile device, follow the setup
instructions in the "Wi-Fi Setup (Android Users Only)" section.
1. Make sure your mobile device's Bluetooth is turned on.
NOTE: Refer to your mobile device's user guide for instructions on turning on
Bluetooth.
2. Tap ADD DEVICE, then tap HD WiFi Camera.
If this is not the first device on your account, tap
Camera.
Tap ADD DEVICE
3. Follow the on-screen instructions to complete setup.
Installing Power Adapter Plugs
If you are a European user, you received a set of power adapter plugs relevant
to your country. To install the power adapter plugs:
1. Tuck in the power pins as illustrated
in the image below.
Power
pins
Wi-Fi Setup
If Bluetooth (BLE) is not available on your mobile device, follow these setup
instructions:
1. Tap ADD DEVICE, then tap HD WiFi Camera.
If this is not the first device on your account, tap
Camera.
2. Scan the QR code as shown below.
3. Follow the on-screen instructions to complete setup.
NOTES:
• If you cannot scan the camera's QR code, tap
the "Camera Overview" section for Device ID location.
• If your mobile device has Bluetooth turned on but your camera's device ID does not show up on
the screen, tap "CAN'T FIND YOUR DEVICE?". Scan the QR code and follow the on-screen
instructions to complete setup.
lorextechnology.com
Lorex Secure
and then tap HD WiFi
(European Users Only)
2. As shown in the image below,
push the power adapter plug in the
power adapter body until you hear
a click.
Power
adapter
USB port
facing down
(Android Users Only)
Add Camera
Scan the QR code using your mobile device
Center the QR code inside the frame
fxc003484156
Make sure that your camera is turned on
and has a working internet connection
to enter the camera's Device ID manually. See
Tap HD WiFi
Camera
Power
adapter plug
and then tap HD WiFi