Instruction Manual Model FFV-2 Fire Hose Clamp For your personal safety SAVE these instructions READ and UNDERSTAND for future reference. instructions before using tools.
TIMBERLINE FFV2 INTRODUCTION Timberline Firefi ghter Clamps are designed to be used to temporarily stop the pressurized fl ow of water in canvas, rubber or synthetic hose without permanent- ly damaging the hose. Prior to using a Timberline Firefi ghter Clamp, the user should consult and observe any recommendations or precautions from hose manufacturers and industry standards.
Page 5
TIMBERLINE FFV2 Personal Safety Stay Alert, watch what you are doing, and do not use tools while tired or under the infl uence of narcotics, alcohol, or medication. Use proper clothing, eye protection, and safety equipment when us- ing shut-off clamps. A moment of inattention while operating shut-off tools may result in personal injury.
Page 7
TIMBERLINE FFV2 Keeping your arm that is holding onto the top handle straight, slowly crouch down using your body weight to depress the top handle on the clamp. This will instantly shut off water supply. Fig 4 The clamp is self-locking and will remain locked until Fig 4 released.
Page 8
ACCESSORIES Any accessories or attachments recommended for use with your Timberline Tool are specifi ed in this manual. The use of any other accessories or attachments might present the risk of injury. Only use accessories or attachments for their stated purpose.
800.735.6845 to obtain return authorization for repair. If inspection shows the trouble is caused by defective workmanship or material, Timberline Tool will repair or, at our option, replace the product without charge.
Need help?
Do you have a question about the FFV-2 and is the answer not in the manual?
Questions and answers