Adeunis RF LoRaWAN TEMP User Manual

Ready-to-use temperature device
Hide thumbs Also See for LoRaWAN TEMP:

Advertisement

Quick Links

LoRaWAN TEMP
Ready-To-Use Temperature Device
Ce Guide utilisateur s'applique à partir des versions logicielles suivantes :
This User Guide applies from the following firmware versions:
Version RTU : V01.04.00
Version APP : V01.03.03
adeunis ®
283 rue Louis Néel - Parc Technologique Pré Roux
38920 CROLLES - France
Tel. : +33 (0)4 76 92 07 77 - Fax : +33 (0)4 76 04 80 87
DISTRIBUTED BY TEXIM EUROPE
www.adeunis.com
sales@adeunis.com
Guide utilisateur / User Guide
Version 2.0.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LoRaWAN TEMP and is the answer not in the manual?

Questions and answers

Summary of Contents for Adeunis RF LoRaWAN TEMP

  • Page 1 LoRaWAN TEMP Ready-To-Use Temperature Device Guide utilisateur / User Guide Version 2.0.0 Ce Guide utilisateur s’applique à partir des versions logicielles suivantes : This User Guide applies from the following firmware versions: Version RTU : V01.04.00 Version APP : V01.03.03 adeunis ®...
  • Page 2: Products And Regulatory Information

    LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 PRODUCTS AND REGULATORY INFORMATION Document Information Title LoRaWAN TEMP - User Guide Sub-title Document type User Guide Version 2.0.0 This document applies to the following products : Référence Version firmware...
  • Page 3: Eu Declaration Of Conformity

    LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 EU Declaration of Conformity adeunis 283 rue LOUIS NEEL 38920 Crolles, France 04.76.92.01.62 www.adeunis.com Declare that the DoC is issued under our sole responsibility and belongs to the following product:...
  • Page 4 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 INTRODUCTION All rights to this manual are the exclusive property of adeunis®. All rights reserved. Copying this manual (wit- hout written permission from the owner) via printing, copying, recording or by any other means, translating this manual (in full or partially) into any other language, including all programming languages, using any electrical, mechanical, magnetic or optical devices, manually or any by other methods, is prohibited.
  • Page 5: Environmental Recommendations

    LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 ENVIRONMENTAL RECOMMENDATIONS All superfl uous packaging materials have been eliminated. We have done everything possible to make it easy to separate the packaging into three types of materials: cardboard (box), expanded polystyrene (fi ller material) and polyethylene (packets, foam protective sheets).
  • Page 6: Recommandations Regarding Use

    LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 RECOMMANDATIONS REGARDING USE • Before using the system, check that the power supply voltage shown in the user manual corresponds to your supply. If it doesn’t, please consult your supplier.
  • Page 7: General Description

    • This product meets the needs of users who require to remotely monitor internal and external temperatures of storage rooms, meeting rooms, cold rooms, etc. • The use of the LoRaWAN protocol allows the user to integrate the LoRaWAN TEMP into any network that is already deployed. • The LoRaWAN TEMP is fitted with internal and external probes.
  • Page 8 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 1.2. Dimensions Values in millimetres 49,50 1.3. Electronic board 49,50 Internal antenna RF module Internal battery LoRaWAN protocol 49,50 USB port for product configuration DISTRIBUTED BY TEXIM EUROPE 49 of 82...
  • Page 9: Technical Specifications

    LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 1.4. Technical Specifications 1.4.1 General characteristics Parameters Value Supply voltage Nominal 3.6V Power supply Removable battery version: SAFT LS14500 Maximal power 90mA Working temperature -25°C / +70°C Dimensions: 105 x 50 x 27mm...
  • Page 10 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 2. PRODUCT OPERATION 2.1. Global operation Important: adeunis® use the most significant byte first format. The product has several operating modes: PARK MODE Presence of a magnet on the product >6s...
  • Page 11: Operating Modes

    LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 2.1.4 REPLI mode The product enters this very low consumption mode following the detection of a level of battery that is too low. In this mode the product wakes up every 5 seconds to make the red LED flash twice.
  • Page 12 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 2.2.2 Transmission over threshold The product allows the detection threshold overrun (upper and lower) for each sensor according to the following diagram: Product in standby Sampling period reached? Internal tempe-...
  • Page 13 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 Explanation of thresholds and hysteresis: high threshold High threshold - high threshold hysteresis Sensor value Low threshold + low threshold hysteresis Low threshold Low alarm enabling Low alarm disabling High alarm enabling High alarm disabling The period of monitoring by the sensors is equal to the period of acquisition (register 332) divided by the super-sampling factor (register 333).
  • Page 14 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 E.g.: Registre Codage de la valeur Valeur Résultat S301 Décimal Event mode S320 Hexadécimal 0xD0 Identifier of the internal sensor set to 0xD S322 Hexadécimal 0x80 Identifier of the external sensor set to 0x8 S321 Hexadécimal...
  • Page 15 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 2.2.3 Transmission of a daily Keep Alive frame In the event (threshold) mode only, it is possible that the product would never send data frames. So to be sure that it is working properly a Keep...
  • Page 16: Operation Of The Leds

    LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 2.3. Operation of the LEDs Mode LED red state LED green state Transmission of frame (TEST mode only) ON during the transmission cycle Reception of frame (TEST mode only) ON during the reception of a downlink frame...
  • Page 17: Device Configuration

    LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 DEVICE CONFIGURATION The device can be configured using the USB connector. This connection allows you to communicate with the device via a virtual com port and to transmit AT commands in order to modify the parameters of the device.
  • Page 18 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 3.2. Command mode Use a COM port terminal in order to communicate with the device. We use the HERCULES COM port soft terminal available to download for free by clicking on the following link: http://www.hw-group.com/devices/hercules/index_en.html •...
  • Page 19 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 3.3. AT commands A command starts with 2 ASCII characters: “AT”, followed by one or more characters and data (see the list below for the syntax of AT com- mands available on the modem).
  • Page 20: Description Of The Registers

    LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 3.4. Description of the registers On switching on the product works according to the last saved configuration (Factory Configuration if it is the first start, or if this configuration has not been changed). Commands such as Modification TTY<n>=<M> or ATR allow you to change the content of the registers: <n> repre- senting the number of the register and <m>...
  • Page 21 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 Configuring the event behaviour of the Hexadecimal Default 0x03 internal sensor Bits 0 to 1: Threshold triggering • 0 = None • 1 = Low only • 2 = High only •...
  • Page 22 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 3.4.2 Network registers The list of registers below allows you to change the behaviour of the product application. This list is accessible in Provider mode following execution of the ATT63 Provider command.
  • Page 23 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 LORA APP_SKEY (first part – MSB) Hexadecimal Default: 0 Parameter encoded on 16 bytes. Each of the 4 registers contains 4 LORA APP_SKEY (second part - MID MSB) Hexadecimal bytes.
  • Page 24 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 NOTE 2: By default, channels 0 to 2 use the default settings of the LoRaWAN network; the other 4 channels are inactive. A register value different from 0 or 1 allows the channel to be configured as follows:...
  • Page 25 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 4. DESCRIPTION OF THE FRAMES 4.1. Uplink frame All of the uplink frames of the product to the network (uplink) always have a size of 11 bytes. 4.1.1 Fixed bytes...
  • Page 26 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 Description of the frame: • Byte 2: register 300, periodicity of the Keep Alive frame, expressed in tens of minutes • Byte 3: register 301, periodicity of transmission (periodic mode), expressed in tens of minutes •...
  • Page 27 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 In the example in grey this gives: • Bytes 2 to 3=0x0190: register 328, the value of the high threshold of the external sensor is: 400/10=40°C • Byte 4=0x14: register 329, register 329, the value of the hysteresis of the high threshold of the external sensor is: 20/10=2°C •...
  • Page 28 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 o Bits 4 to 7: The user identifier defined in register 322 • Bytes 6 to 7: Value measured on the internal sensor • Signed value on 16 bits, • Expressed in tenths of degrees, •...
  • Page 29 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 4.1.6 Data Frame This frame (0x43) contains the values measured on the different sensors. Code Status PAYLOAD internal External Value read on the Value read on the 0x43 Cf Status...
  • Page 30: Downlink Frames

    LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 4.1.7 Summary of the conditions of the transmission of the uplink frames The table below summarizes the conditions of the transmission of the different uplink frames: Code Description Sending conditions...
  • Page 31 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 4.2.3 Specific register value request frame This frame (0x40) allows to inform the product via the network that it must send the values of specific registers in a uplink frame (0x31).
  • Page 32: Starting Up The Product Using A Magnet

    6 seconds so as to confirm the start-up of the product. When the magnet is well detected, the green LED lights up for 1 second. Once the LoRaWAN TEMP unit validates its start-up, it immediately transmits status frames followed by a data frame (according the defined periodicity).
  • Page 33: Closing The Casing

    LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 5.3. Closing the casing Once previous stages have been carried out, you can close the casing of the LoRaWAN TEMP Procedure: Make sure that the seal is properly positioned on the base Clip the electronic board onto the casing’s base.
  • Page 34: Installation And Use

    LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 6. INSTALLATION AND USE 6.1. Correct positioning of the product transceivers There are two key rules for optimising radio ranges. • The first one consists of positioning your product as high as possible.
  • Page 35: Fixing With Screws

    LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 To optimise fastening onto a tube or mast, we recommend you Pins remove the Rail-DIN locking/unlocking lever. To remove it, pull the lever down until the locking pins are opposite...
  • Page 36: Din-Rail Fixing

    LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 6.2.3 DIN-Rail fixing This system, integrated into the casing, enables the product to be fastened onto a standard 35 mm rail. • To fit the casing, place the upper inserts on the rail and lower the product to clip it into position.
  • Page 37 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 DEUTSCH Vorschriften DISTRIBUTED BY TEXIM EUROPE 78 of 82...
  • Page 38: Technischer Support

    LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 HAFTUNGSAUSSCHLUSS Dieses Dokument und die Nutzung aller darin enthaltenen Informationen setzt das Einverständnis mit den Bestim- mungen und Bedingungen von adeunis® voraus. adeunis® übernimmt keine Garantie für die Richtigkeit oder Vollständigkeit des Inhalts dieses Dokuments und behält sich das Recht vor, jederzeit und ohne Vorankündigung Änderungen an den Produktspezifi...
  • Page 39 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 VORBEMERKUNG Alle Rechte an dieser Anleitung liegen ausschließlich bei . Alle Rechte vorbehalten. Die Vervielfältigung dieser Anleitung (ohne schriftliches Einverständnis des Eigentümers) mittels Drucken, Kopieren, Speichern oder in ande- rer Weise, die Übersetzung dieser Anleitung (vollständig oder teilweise) in jedwede Sprache, einschließlich aller Programmiersprachen, unter Verwendung jeglicher elektrischer, mechanischer, magnetischer, optischer, manueller Geräte oder anderer Methoden, ist untersagt.
  • Page 40 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 UMWELTSCHUTZHINWEISE Es wurden alle überfl üssigen Verpackungsmaterialien vermieden. Wir haben uns bemüht, dass die Verpackung leicht in drei Materialarten getrennt werden kann: Pappe (Schachtel), expandiertes Polystyrol (Puff ermaterial) und Polyethylen (Tüten, Schaumstoff -Schutzlage). Ihr Gerät besteht aus recycelbaren Materialien, die im Falle einer Demontage durch ein Fachunternehmen wiederverwendet werden können.
  • Page 41 LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.0 GEBRAUCHSHINWEISE • Überprüfen Sie vor Benutzung des Systems, ob die in dessen Betriebsanleitung angegebene Versorgungsspan- nung mit Ihrer Stromquelle übereinstimmt. Falls nicht, wenden Sie sich an Ihren Lieferanten. • Stellen Sie das Gerät auf eine ebene, feste und stabile Oberfl äche.
  • Page 42: Contact Details

    Contact details The Netherlands Belgium UK & Ireland Elektrostraat 17 Zuiderlaan 14 bus 10 St. Mary’s House, Church Lane NL-7483 PG Haaksbergen B-1731 Zellik Carlton Le Moorland Lincoln LN5 9HS +31 (0)53 573 33 33 +32 (0)2 462 01 00 +44 (0)1522 789 555 F: +31 (0)53 573 33 30 +32 (0)2 462 01 25...

Table of Contents