Advertisement
Quick Links
Smart Task
Contents:
Retrofit Kit
Installation Manual
Sensor Specifications
Switching Capacity:
500 watts incandescent or 250 watts
Fluorescent
Voltage:
120 Volts AC, 60Hz
UL Listing:
For indoor applications
Time Adjustment:
5 seconds to 15 minutes
Sensor Construction:
Precision molded polycarbonate
Detection Zone:
180 degrees by 30'
Sensor wires:
12" long
Vandal Resistant Lens:
Hard lens resists vandalism.
Why RAB Sensors are
Best for You
Smaller is better! Smart Task retrofit
kit sensor uses state-of-the-art surface
mount technology (SMT), just like cellular
phones and beepers. SMT gives you more
reliability, greater RF immunity, and a
compact sensor that can fit neatly where
others cannot.
Wider is better! The wide view
detects movement within its 120º area
with only one compact sensor, detecting
people as they exit or enter.
Sensor
180º
Molded is better! No leaky gaskets or
bug hotels with Smart Task.
The hard lens is molded as part of the
case. It's absolutely sealed!
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for RAB Smart Task
Summary of Contents for RAB Smart Task
-
Page 1: Installation Manual
Why RAB Sensors are Sensor Specifications Smart Task Best for You Switching Capacity: 500 watts incandescent or 250 watts Smaller is better! Smart Task retrofit Fluorescent kit sensor uses state-of-the-art surface Retrofit Kit mount technology (SMT), just like cellular Voltage: phones and beepers. - Page 2 Assembly and Wiring Photocell 1. Smart Task retrofit sensor installs on your existing task lighting fixture. What does Manual Override do? Keep lights on by flipping the wall switch 2. The opening in your existing fixture switch two times within 5 seconds.
- Page 3 Lens Mask Kit provided or opaque weatherproof tape. • Smart Task may be painted to blend in with walls. Carefully apply masking tape to the 2. Start outside the Detection Zone and walk across the zone until the lights go on.
-
Page 4: Limited Warranty
1. Re-read the Technical Tips sections of this vary from state to state. Smart Task sensor is 4. Make sure sensor is located below and as manual. designed to detect movement in the detection far as possible from its lights.
Need help?
Do you have a question about the Smart Task and is the answer not in the manual?
Questions and answers