Do you have a question about the Stealth STL110 and is the answer not in the manual?
Questions and answers
Skip Willmuth
April 18, 2025
My STL 110 has worked for years but recently it simply stopped working. the bulbs are ok and the breakers are on. Any ideas?
1 comments:
Mr. Anderson
May 10, 2025
If the RAB Stealth STL110 stopped working despite functional bulbs and power, the issue could be that it is not installed on a dedicated circuit, which may cause overloading. Another possible issue is that the sensor is receiving reflected light from its own lights, causing it to shut off. Adjusting the photocell control knob counterclockwise in small increments or moving the sensor away from reflective surfaces may resolve the problem.
Need help?
Do you have a question about the Stealth STL110 and is the answer not in the manual?
Questions and answers
My STL 110 has worked for years but recently it simply stopped working. the bulbs are ok and the breakers are on. Any ideas?
If the RAB Stealth STL110 stopped working despite functional bulbs and power, the issue could be that it is not installed on a dedicated circuit, which may cause overloading. Another possible issue is that the sensor is receiving reflected light from its own lights, causing it to shut off. Adjusting the photocell control knob counterclockwise in small increments or moving the sensor away from reflective surfaces may resolve the problem.
This answer is automatically generated