Table of Contents
Advertisement
GENERAL FUNCTIONS
1.
Switching on and off
Press the ON/OFF button to turn the radio on or in standby.
2.
Switching among DAB / FM / Bluetooth / AUX IN / USB / SD modes
Press the SOURCE button to switch between modes.
3.
Tuning the Radio
Tune the radio using the TUNING/SEEK knob on the right.
4.
Adjusting the Volume
Adjust the volume with the VOLUME/TONE knob on the left.
5.
Adjusting the Tone
Press and hold the VOLUME/TONE knob on the left for about 3 seconds and rotate
it to adjust the Bass and Treble.
6.
Bluetooth paring
Press the SOURCE button to Bluetooth mode. Then open the Bluetooth setup
menu in mobile phone, search and connect to the Bluetooth device name "PP Slim
3". Once the mobile phone name is showed on the LCD, you can start streaming
music to mobile phone.
7.
Playing music stored in a paired mobile phone from the Slim 3 radio in
Bluetooth mode
Press the REWIND, FAST FORWARD and PLAY/PAUSE buttons (Preset buttons
3, 4 and 5)
8.
Charging a mobile phone from the Slim 3 radio
Connect the mobile phone to the USB socket on the left side with an appropriate
cable (not included with the radio).
USING THE DEVICE FOR THE FIRST TIME
1. Place the radio on a flat surface.
2.
Carefully extend the antenna located on the top of the radio. Adjust the antenna so
it is vertically extending above the radio.
3.
Plug the AC power cord into the AC socket. The radio will start up and the display
will show "WELCOME TO DIGITAL RADIO" for a few seconds. Then the radio will
automatically perform an auto scan of the Band III DAB channels and the FM band
in the background.
4. When the scan is completed, the 5 strongest FM stations and the first 5 DAB
stations will be stored as presets. The radio will switch to standby with the updated
clock and date showing on the display.
5.
If no signals are found, the clock will not be updated. It may be necessary to
relocate the radio to a position giving better reception.
9
DAB RADIO MODE
Operating the radio – DAB
1.
Carefully extend the antenna. Press the ON/OFF button to switch on the radio.
2.
Select the DAB waveband by pressing the SOURCE button.
3. The first station (in numeric-alpha order 0...9...A...Z) in the list of stations found will
be played. The display will show the station name.
If the radio has been used before, the last used station will be selected.
4.
If no signals are detected, "No stations available" will be displayed. It may be
necessary to relocate the radio to a position giving better reception.
You should then carry out an auto scan to find stations, please refer to the section
"Find new stations - DAB".
Selecting a station – DAB
1.
Press the ON/OFF button to switch on the radio.
2.
Select DAB waveband by pressing the SOURCE button. The display will show
"Now tuning" for a few seconds.
3.
The display shows the name of the radio station currently selected.
4.
Rotate the TUNING/SEEK knob to scroll through the list of available stations.
5.
When the desired station name appears on the display, press the TUNING/SEEK
knob to select the station. The display will show "Now tuning" while the radio finds
the new station.
Note: If after selecting a station the display shows "No stations available", it may be
necessary to relocate the radio to a position giving better reception.
Secondary services – DAB
1.
Certain radio stations have one or more secondary services associated with them.
If a station has a secondary service associated with it, then the secondary service
will appear immediately after the primary service as you turn the TUNING/SEEK
knob.
2.
Press the TUNING/SEEK knob to select the secondary service.
Most of secondary services do not broadcast continually and if the selected service
is not available, the radio will re-tune to the associated primary service.
GB
10
Advertisement
Table of Contents
