Table of Contents
Advertisement
Lanner Electronics Inc.
Installing Ethernet NIC Module
NCA-4210 supports one Ethernet NIC module space to expand its network throughput. Please
follow the instructions below.
Notes: For information about compatible modules, please refer to the "Ordering Information"
and "Optional Accessories" sections, or contact Lanner for more details.
1. Rotate and loosen the two captive screws on the bezel of the module slot and then remove
the bezel.
2. Position the gold finger of module as shown in the image below. When sliding the module
into the slot, make sure the module stays in the guides of the expansion slot.
7F, 173, Section 2 Datong Road
Sijhih City, Taipei 221, Taiwan
Tel: 886-2-86926060 Fax: 86926101-3
URL: www.lannerinc.com
45
Advertisement
Table of Contents
