Installing The System Memory - Lanner electronics NCA-4210 User Manual

7F, 173, Section 2 Datong Road
Sijhih City, Taipei 221, Taiwan
Tel: 886-2-86926060 Fax: 86926101-3
Lanner Electronics Inc.
URL: www.lannerinc.com

Installing the System Memory

The motherboard supports DDR4 ECC/UDIMM up to 2,400MHz memory at max. 16GB per
socket. Please follow the steps below to install the DIMM memory modules.
1. Power off the system and locate the DDR DIMM slot.
2. Pull open the DIMM slot latches
3. Align the DIMM module and make sure the notches of the module aligned with the socket
keys in the slot.
4. Insert the module into the slot until it's firmly seated and close the latches.
38