Samsung SyncMaster 920BM Owner's Manual page 17

Using the Stand
Monitor Assembly
Monitor and Bottom
Attaching a Base
This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.
A. Monitor
B. Mounting interface pad (Sold separately)
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the
screen.
3. Remove screws and then remove the stand from the LCD monitor.
4. Align the mounting interface pad with the holes in the rear cover mounting Pad and secure
it with four screws that came with the arm-type base, wall mount hanger or other base.
Do not use screws longer than the standard dimension, as they may damage the inside of
the Monitor.
For wall mounts that do not comply with VESA standard screw specifications, the length of
the screws may differ depending on their specifications.
Do not use screws that do not comply with the VESA standard screw specifications.