Advertisement
b. Start the engine and evenly adjust both throttle body
screws, as needed, to maintain idle. Do NOT drive the
vehicle yet.
c. Using a timing light, adjust the distributor to 12° BTDC.
Then tighten down the distributor clamp.
d. Click Unlock Timing and proceed to Step 17.
Proceed with Step 16 if you have NOT installed
the additional Ignition Control components.
Disregard otherwise and proceed to Step 17.
16. Start the engine and evenly adjust both throttle body
screws, as needed, to maintain idle. Proceed to Step 17. Do
NOT drive the vehicle yet.
17. Warm the engine up to 170°F. Once the proper engine
temperature is reached, adjust both throttle body idle screws
equally to set your desired base Idle RPM (engine idle speed).
Click the Right Arrow to proceed.
18. Now you can set your Idle Speed Target. This should be 50
RPM less than your base engine idle. Click the Right Arrow to
proceed.
19. Select TPS to calibrate the Throttle Position Sensor. Do
NOT rev the engine or move the throttle during this procedure.
20. The E-Tuner app will now automatically save a backup
copy of the Base Map calibration to My Maps. Click Finish to
exit the Setup Wizard.
21. The vehicle can now be driven. It's highly recommended
to put the vehicle through various loads and conditions to help
the system learn.
TIP: The key to driving your vehicle initially with the E-Street
2 EFI System is to employ smooth slow throttle transitions and
accelerations. Try to drive the vehicle in a manner that covers
all conditions, such as: light load, heavy load, high RPM and low
RPM.
DOWNLOADING THE E-TUNER APP ONTO YOUR OWN
ANDROID DEVICE
NOTE: This is a general guide on how to download the Edelbrock
E-Tuner app from the Google Play Store. Because the Android
platform varies from device to device, the images below may
vary. NOTE: If not using Wi-FI, standard Data charges may apply
when downloading the E-Tuner app.
1.
Launch the Google Play store App by selecting
the "Play Store" icon:
NOTE: Most of the time, the app can be found in the All Apps
section.
2.
If you don't have a Google account, you must create one to
continue. In most cases, you can follow the instructions on your
device to set one up.
3.
In the Google Play store app, search for the "Edelbrock
E-Tuner" app.
4.
Select the Edelbrock E-Tuner app and click install to
download.
5.
The E-Tuner app should appear on your Home screen. If
not, select ALL APPS and scroll through the apps to find the
E-Tuner icon:
6.
Launch the E-Tuner app and proceed with the Setup Wizard
to start configuring your E-Street 2 EFI System with a base map.
Brochure 63-36641
Rev 10/15
Advertisement
