Table of Contents
Advertisement
monitor, Plug &
manual to see if the
Play (VESA DDC)
Plug & Play (VESA
monitor found".
DDC) function can
be supported.
Problems related to
No sound
Audio
Sound level is too
low.
Check when
MagicTune™
MagicTune™ does
feature is found only
not function
on PC (VGA) with
properly.
Window OS that
supports Plug and
Play.
MagicTune™
Have you changed
doesn't work
your PC or video
properly.
graphic card?
Did you install the
program?
Visit the MagicTune™ website and download the installation software for MagicTune™ MAC.
Check the following items if there is trouble with the monitor.
Symptom
The screen does
When booting up, it takes about 30 seconds for the networking functions to be
not appear when I
activated and no screen is displayed for about 3 to 4 seconds.
switch to the Client
Wait 30 seconds after the power is turned on, and try to switch modes again.
Mode.
If the operating system does not boot up due to damage to Windows or a blue
screen is displayed, download the Windows XPe OS from this site and recover
your operating system with it :
The client screen
1) Check if the Hub port LED to which the LAN cable is connected blinks. If not,
appears, but I
that indicates that the LAN connection is disconnected. In this case, connect
cannot connect to
using another LAN cable.
the server.
2) Check if the settings of the 'Settings', 'Network' tab are properly set up. The
default setting is "DHCP". If your network uses a static IP address, select 'Use
the following IP address' and then enter the appropriate IP address information.
3) Check if the 'User Name' and 'Password' set in the 'Remote Desktop' tab of
'Settings' are the same as those of the host PC. If not, match the 'User Name'
Installation
Instructions.
Ensure that the audio cable is firmly connected to both
the audio-in port on your monitor and the audio-out port
on your sound card.
(Refer to
Connecting the
Monitor)
Check the volume level.
Check the volume level.
If the volume is still too low after turning the control to its
maximum, check the volume control on the computer
sound card or software program.
* To check whether your PC is available for
MagicTune™ feature, follow the steps below (When
Windows™ is XP);
Control Panel → Performance and Maintenance →
System → Hardware → Device Manager → Monitors →
After deleting Plug and Play monitor, find 'Plug and Play
monitor' by searching new Hardware.
MagicTune™ is an additional software for the monitor.
Some graphic cards may not support your monitor.
When you have a problem with the graphic card, visit
our website to check the compatible graphic card list
provided.
http://www.samsung.com/monitor/magictune
Download the latest program. The program can be
downloaded
http://www.samsung.com/monitor/magictune
Reboot the computer after installing the program for the
first time. If a copy of the program is already installed,
remove it, reboot the computer, and then install the
program again. You need to reboot the computer for it to
operate normally after installing or removing the
program.
Solutions
http://www.syncsight.com
Advertisement
Table of Contents
