Table of Contents
Advertisement
Version 2.0
Example:
10G(config)# system-name show
system name is 10G
tfm
Description:
Syntax:
14.6.1
Cluster Options
A cluster may include several gateways. The sRB-20210G supports both High availability
(load balancing in active-active fashion) and failover. Note that the active-active feature is
currently available in limited functionality.
The following are the commands available in the Cluster Mode.
sRB-20210G-61f0(config-cluster)# ?
<command> ?
?
commands.
cluster hash-table-algorithm set
cluster join
automatically
cluster join-now
cluster load-balance-algorithm set Sets the load balancing algorithm
cluster loop-prevention set
cluster mode set
cluster box-id set
None.
cluster priority set
cluster show
cluster id set
end
exit
Usage
cluster hash-table-algorithm set
cluster join
cluster join-now
cluster load-balance-algorithm set cluster load-balance-algorithm
cluster loop-prevention set
162
Changes to TFM Configuration mode. Refer to Section
list of commands available in this menu.
tfm
Displays the command's usage string.
Displays the list of available
[xor-infiniband-
eth,infiniband,ethernet].
Allows the I/O Gateway to
join the cluster.
Automatically joins the cluster.
[active-active,master-standby].
Enables/Disables cluster.
Set the box ID for Loop-Prevention
Shows cluster configuration.
Changes cluster ID number.
Ends the CLI.
Exits to previous menu.
[xor-infiniband-
eth,infiniband,ethernet]
cluster join [yes,no]
set [active-active,master-
standby]
[none,full,automatic,manual]
Mellanox Technologies
Command Line Interface (CLI) Management
Sets the hash table algorithm
Sets the loop prevention mode.
Changes I/O Gateway priority.
cluster hash-table-algorithm set
cluster join-now
cluster loop-prevention set
1 4.6.10 for a
Advertisement
Table of Contents
