Samsung SyncMaster 460DR Quick Start Manual page 9

1. ON / OFF
2. MagicInfo
3. MDC
4. LOCK
5. MagicInfo buttons
6. +100 DEL
7. VOL
8. MUTE
9. TTX/MIX
10. MENU
11. ENTER
12. P.MODE
Introduction
FF
Turns the LCD Display On/Off.
MagicInfo Quick Launch Button.
(Applicable to the DRn model only)
MDC Quick Launch Button.
Activates or deactivates all function keys on both the remote con-
trol and the LCD Display except for the Power and LOCK buttons.
MagicInfo Quick Launch Button.
(Applicable to the DRn model only)
• Alphanumeric: Used to enter the Internet address.
• DEL: Functions as the backspace.
• SYMBOL: Used to enter the symbols. (.O_-)
• ENTER: Used to enter values.
Press to select channels over 100. For example, to select channel
121, press "+100", then press "2" and "1".
- This fuction does not work for this LCD Display.
Adjusts the audio volume.
Pauses (mutes) the audio output temporarily. This is displayed on
the lower left corner of the screen. The audio resumes if MUTE
or - VOL + is pressed in the Mute mode.
TV channels provide text information services via teletext.
- This fuction does not work for this LCD Display.
Opens the on-screen menu and exits from the menu screen or
closes the screen adjustment menu.
Activates a highlighted menu item.
When you press this button, current picture mode is displayed on
the lower center of the screen.
AV / S-Video / Component : P.MODE
The LCD Display has four automatic picture settings that are pre-
set at the factory. Then push button again to circle through avail-
able preconfigured modes. ( Dynamic → Standard → Movie →
Custom )
PC / DVI / BNC : M/B (MagicBright)
MagicBright is a new feature providing the optimum viewing
environment depending on the contents of the image you are