Connecting A Camcorder - Samsung SyncMaster 460DR Quick Start Manual

Samsung lcd monitor quick start guide

Hide thumbs Also See for SyncMaster 460DR:

Table of Contents

Note

•

Select Component for the connection to a DVD player using the SOURCE button on the front of

the LCD Display or on the remote control.

•

Then, start the DVD Player with a DVD disc inserted.

•

A component cable is optional.

•

For an explanation of Component video, consult your DVD manual.

Connecting a Camcorder

Locate the A/V output jacks on the camcorder. They are usually found on the side

or back of the camcorder. Connect a set of audio cables between the AUDIO

OUTPUT jacks on the camcorder and the AV AUDIO IN [L-AUDIO-R] on the

LCD Display.

Connect a video cable between the VIDEO OUTPUT jack on the camcorder and

the AV IN [VIDEO] on the LCD Display.

Note

•

Select AV for the Camcorder connection using the SOURCE button on the front of the LCD Display

or on the remote control.

•

Then, start the Camcorders with a tape inserted.

•

The audio-video cables shown here are usually included with a Camcorder.

(If not, check your local electronics store.)

•

If your camcorder is stereo, you need to connect a set of two cables.

Connections

Table of Contents

460drn