Care And Maintenance - Kolcraft Transitional 4 Drawer Dresser Assembly Instructions Manual

Care and Maintenance

After completing assembly, check that all bolts and screws are secure and tight. Hardware can
become loose over time, so it is your responsibility to periodically check the tightness of all
fasteners as long as you use the nursery furniture.
After completing assembly, use the provided wall mounting kit to secure your dresser to the
wall.
Wood is a natural material and as such it can be affected by changes in temperature and
humidity. Extreme changes in humidity and temperature can cause the wood to warp, swell,
crack or shrink, thus compromising the structural integrity of the furniture and making it
dangerous to use.
Furniture should always be stored indoors in climate controlled, dry locations. Use care when
using a vaporizer or humidifier around the furniture. Do not aim the vapor at the crib or any other
wooden furniture in the nursery. Avoid using vaporizers or humidifiers for extended periods of
time.
To clean the furniture, wipe with a damp cloth and immediately dry the surface. Do not use any
chemical cleaners or polishes. Such products can leave a residue on the finish and come in
contact with your child.
Your furniture has a durable and protective non-toxic finish, however if you decide to refinish it,
you must use a non-toxic finish specified for children's products. Do not use any toxic stripping
methods to remove the old finish.
Please refer to your furniture's instruction manual for proper assembly. Instruction manuals
can be downloaded from Kolcraft.com, MiraStudios.com, and Sealybaby.com.