Samsung SyncMaster 245T Owner's Manual page 17

HDMI IN / DVI IN(HDCP) / RGB IN
VIDEO IN / S-VIDEO IN / AUDIO POWER / AUDIO OUT
USB connection terminal
COMPONENT IN
Kensington Lock
POWER S/W
: Switch the monitor on and off.
POWER
: Connect the power cord for your monitor to the POWER IN
port on the back of the monitor.
HDMI IN
: Connect the HDMI IN terminal at the back of your monitor
to the HDMI terminal of your digital output device using a
HDMI cable.
DVI IN(HDCP)
: Connect the DVI cable to the DVI IN(HDCP) port
on the back of your monitor.
RGB IN
: Connect the RGB IN terminal at the back of your monitor to
your computer.
VIDEO IN
: External device (video) input terminal
S-VIDEO IN
: External device (S-video) input terminal
AUDIO POWER (DC 12V
: Connect the speaker power line connected to the speaker
to the AUDIO POWER terminal of the monitor.
AUDIO OUT
: When connecting an external device to your monitor using
an HDMI cable, you must connect the AUDIO OUT terminal
of your monitor and the SPK terminal (yellowish green -
sound input terminal) of the dedicated speaker using a
stereo cable to hear audio from the HDMI screen.
UP (USB upstream port)
: Connect the UP port of the monitor and the USB port
of the computer with the USB cable.
DOWN (USB downstream port)
: Connect the DOWN port of the USB monitor and a
USB device with the USB cable.
To use DOWN (Downstream Port), you have to connect
the UP (Upstream Cable ) to the PC.
Make sure to use the USB cable supplied with this monitor to
connect the monitor's
port.
Connect the VIDEO OUT port of the DVD / DTV Set-Top Box to
the Y, P ,P input ports using a component video cable (Y,
B R
P ,P ).
B R
The Kensington lock is a device used to physically fix the
)
UP port and your computer's USB