Samsung SyncMaster 244T Owner's Manual page 12

Digital(DVD)/Video
/S-Video/Component :
Mode button
Brightness button [ ]
Enter button [ ] /
SOURCE button
AUTO button
PIP button
Power button [ ]
Power indicator
See PowerSaver
functions. For energy conservation, turn your monitor OFF when it is not needed, or when
leaving it unattended for long periods.
Rear
For working with a mixture of images such as text and
graphics.
4) Text : Normal brightness
For documentations or works involving heavy text.
>>Click here to see an animation clip
The Monitor has four automatic picture settings ("Dynamic",
"Standard", "Movie" and "Custom") that are preset at the factory.
You can activate either Dynamic, Standard, Movie, or Custom.
You can select "Custom" which automatically recalls your
personalized picture settings.
1) Dynamic
Select this mode to view a sharper image than in "Standard"
mode.
2) Standard
Select this mode when the surroundings are bright. This also
provides a sharp image.
3) Movie
Select this mode when the surroundings are dark.
This will save power and reduce eye fatigue.
4) Custom
Select this mode when you want to adjust the image
according to your preferences.
>>Click here to see an animation clip
( Available in Analog Mode Only )
When OSD is not on the screen, push the button to adjust
brightness.
>>Click here to see an animation clip
Activates a highlighted menu item. /
Push the 'SOURCE', then selects the video signal while the
OSD is off. (When the SOURCE button is pressed to change the
input mode, a message appears in the upper left of the screen
displaying the current mode -- Analog, Digital, Video, S-Video
and Component input signal.)
Note : Changing the source is allowed only in external devices
that are connected to the monitor at the time.
(Available in Analog mode only)
When the 'AUTO' button is pressed, the Auto Adjustment screen
appears as shown in the animated screen on the center.
Press to self-adjust to the incoming Analog signal. The values of
fine,coarse and position are adjusted automatically.
>>Click here to see an animation clip
( Available in Analog/Digital(PC) Mode Only )
In Analog or Digital Mode, turns on Video screens in PIP Mode.
You can view a picture from Video, S-Video, or Component
through the PIP screen in Analog and Digital (PC) mode.
Use this button for turn the monitor on and off.
This will enable you to see the overall power status of the
system. For more information, see the
described in the manual for further information regarding power saving
PowerSaver section.