Using The 12Volt Dc Cord - Oliso PRO VS95A User Manual

Using the 12 Volt DC Cord (VS97A Only)
Your Oliso ® PRO™ VS97A Smart Vacuum Sealer comes with a 12 Volt DC cord for use in cars, RVs, trucks and boats. ONLY use
the 12 Volt DC cord that comes with your vacuum sealer.
1. Plug the 12 Volt DC cord into the Oliso
2.
Plug the 12 Volt DC cord into the DC power source in your vehicle. Make sure that your vehicle has a 10 amp rated fuse or
higher before use.
3. When using the 12 Volt DC cord, make sure that your vehicle's engine is on and the lights, radio and air conditioner are off.
NOTE: Only use supplied 12 Volt DC Adapter (Oliso
® PRO™ VS97A Smart Vacuum Sealer.
DC JACK
® part number VSA201)
Insert DC adapter into
car power source