How To Set The Date And Day - Seiko 7C46 Instructions Manual

Turn the crown in the direction shown by the arrow to set the time.
3
• The watch is designed to change the date and day once in 24 hours. When
setting the hour hand, check that AM/PM is correctly set.
• When setting the minute hand, advance it 4 to 5 minutes ahead of the desired
time and then slowly turn it back to the exact minutes.
Push the crown back in to the normal
4
position in accordance with a time signal.
The second hand immediately starts moving
and the watch displays the current time.
Relock the crown.
5
• Screw lock type crown → page 10
12
Push the crown back in
to the normal position.

HOW TO SET THE DATE AND DAY

After completing the time setting, move on to set the date and day.
The watch displays the date from the 1st to 31st every month. Manual date and day
adjustment is required on the first day after a month that has less than 31 days:
February, April, June, September and November.
• Do not set the date and day while the hour hand shows any time between 9:30 p.m.
and 3:30 a.m. Date setting during this time period may cause the watch to fail to
change the date and day correctly on the following day.
Unlock the crown.
1
• Screw lock type crown → page 10
Pull out the crown to the first click.
2
Pull out the crown to the first
click.
13