Samsung SyncMaster 940T User Manual page 12

Brightness button
[ ]
Adjust buttons [
Enter button [ ] /
Source button
AUTO button
Power button [ ]/
Power indicator
See PowerSaver
functions. For energy conservation, turn your monitor OFF when it is not needed, or when
leaving it unattended for long periods.
Rear
(The configuration at the back of the monitor may vary from product to product.)
POWER port
DVI IN port
,
Power on/off Switch
(option)
Kensington Lock
See Connecting the Monitor
When OSD is not on the screen, push the button to adjust
brightness.
] Adjust items in the menu.
Activates a highlighted menu item.
Push the ' ', then selects the video signal while the OSD is off.
(When the source button is pressed to change the input mode, a
message appears in the upper left of the screen displaying the
current mode -- analog or digital input signal.)
Note : If you select the digital mode, you must connect your monitor
to the graphic card's DVI port using the DVI cable.
Use this button for auto adjustment.
Use this button for turn the monitor on and off.
This light glows blue during normal operation, and blinking blue
once as the monitor saves your adjustments.
described in the manual for further information regarding power saving
Connect the power cord for your monitor to the power port on the
back of the monitor.
Connect the DVI Cable to the DVI Port on the back of your
Monitor.
Connect the 'DVI-A to D-SUB' Cable to the DVI IN port on the
back of your monitor.
Use this button for turn the monitor on and off.
The Kensington lock is a device used to physically fix the system
to something when using it in a public place. (The locking device
has to be purchased separately.) For using a locking device,
contact the place of purchase.
for further information regarding cable connections.