Advertisement
12
DXST4500
LAMINATE DECK AND LOCKING SHELF PIN INSTRUCTIONS
STEP 1
•
Place the first laminate deck onto the top ridge of the
crossbeams. If seated properly, it will "pop" into place and
lay evenly. Repeat for the remaining decks.
STEP 2
•
There is a locking pin hole at both ends of every crossbeam.
This is where the locking shelf pins are to be installed. If a
pin does not easily slip into place, moderately tap the end of
the crossbeam closest to the upright frame to fully seat the
locking tabs.
Hide quick links:
Advertisement
